3/4" ID x 1" OD White Low Density Polyethylene Bilge Hose for marine pump and low pressure discharge applications. Abrasion and kink resistant. Comes with smooth end connections manufactured into the hose every 36 inches for a leak proof connection. Milky White Color, Suitable for marine and low pressure discharge, Abrasion and kink resistant, For use with hose barbs and clamps. Temperature Range 0 to 150 degrees Fahrenheit. Master Plumber Dispenser Box Carton contains 25 feet of tubing. Made in North America.
1-1/4" ID x 1-3/4" OD x 25', White, Low Density Polyethylene Bilge Hose, For Marine Pump & Low Pressure Discharge Applications, Abrasion & Kink Resistant, Comes With Smooth End Connections Manufactured Into The Hose Every 36" For A Leak Proof Connection, Milky White Color, Suitable For Marine & Low Pressure Discharge, Abrasion & Kink Resistant, For Use With Hose Barbs & Clamps, Temperature Range 0 To 150 Degrees Fahrenheit, Dispenser Box.
1 1/8" ID x 1 5/8" OD White Low Density Polyethylene Bilge Hose for marine pump and low pressure discharge applications. Abrasion and kink resistant. Comes with smooth end connections manufactured into the hose every 36 inches for a leak proof connection. Milky White Color, Suitable for marine and low pressure discharge, Abrasion and kink resistant, For use with hose barbs and clamps. Temperature Range 0 to 150 degrees Fahrenheit. Master Plumber Dispenser Box Carton contains 25 feet of tubing. Made in North America.
1 1/2" ID x 50ft Blue Reinforced PVC Master Plumber Discharge Hose designed for water discharge applications using typical centrifugal and trash pumps. Durable lay-flat design. Can be used for drip irrigation. Temperature range 0 to 170 degrees Fahrenheit. Working pressure 80psi at 70 degrees Fahrenheit. Master Plumber Dispenser Box Carton contains 50 feet of tubing. Made in North America.
Parts2O, Threaded 1-1/4" or 1-1/2" Sump Pump Check Valve, Accepts 1", 1-1/4" and 1-1/2" discharge pipe. Prevents water backflow into sump basin. Anti-airlock hole located at base of threads.
Sump Pump Check Valve 2 1-1/4" & 1-1/2" adaptors. Includes 2 Rubber Reducing Sleeves And 4 Stainless Steel Clamps, FDR Inline Use In 1-1/4-Inch Or 1-1/2-Inch Lines, Comes Ready To Install On 1-1/2-Inch Line - Reverse Reducer Sleeves For Use On 1-1/4-Inch Discharge Pipe.
1-1/4" and 1-1/2" Sump Pump Check Valve with 1 1-1/4" & 1-1/2" adaptor. Male Threads, Discharge Pipe With Flexible Rubber Reducing Sleeve, 2 Stainless Steel Clamps, Discharge And Connects Directly Into 1-1/4-Inch Or 1-1/2-Inch.
Use the Basement Watchdog Battery-Operated Water Alarm to detect leaks before costly water damage occurs. This alarm can detect as little as 1/32 in. of water and produces a loud 110 dB alarm that can be heard throughout the house to provide an effective early warning system. The water alarm can be placed directly on floors or mounted for installation in a variety of locations: in a sump pit, near water heaters, refrigerators or dishwashers, next to washing machines, under sinks, close to air conditioner drain tubes or wherever there is a risk of water damage. The sensor with 6 ft. of wire offers installation versatility and can accommodate the addition of more than 100 ft. of wire. The water alarm operates using a single 9V alkaline battery and has a battery-saver feature that only uses energy when the alarm is sounding.
Detects as little as 1/32 in. of water to offer an effective early warning system
Solid-state circuitry is extremely sensitive and reliable
Loud 110 dB alarm can be heard throughout the house
Sensor has a 6 ft. wire so it can be extended into a sump pit, or mounted on a wall
Accommodates the addition of more than 100 ft. of wire (additional 24 gauge wire not included)
Battery will last approximately 2-4 years or as long as stated on the battery packaging
