3/4" x 1/2" Lead Free Brass Barb Insert Elbow, For Connecting 3/4" & 1/2" Cross Link Polyethylene Pex Tubing At A 90 Degree Angle, Secure Barb End Of Fitting To 3/4" Pex Pipe, Secure The 3/4" Barb End Of Fitting To Pex Pipe With TV #608-826 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Secure 1/2" Barb End Of Fitting To 1/2" Pex Pipe With TV #608-933 Cinch Clamps & TV #608-743 Cinch Tool, Or Copper Crimp Rings Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
1/2" x 3/4" male pipe thread, pexlock male adapter, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers,25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
1/2-Inch Brass Polybutylene Barb x 1/2-Inch Brass, Lead Free, Pex Coupling, Makes A Transition From Polybutylene Tubing To Pex Tubing & Connected With Stainless Steel Cinch Clamps & Cinch Tool True Value #608-743, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degree Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
3/4", pexlock coupling, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of channel lock pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
3/8" & 1/2", pex bend support allows for 90° bends to be made with pex tubing which can eliminate the need for additional fittings in certain instances, reducing the amount of potential leak points in a plumbing system. bend supports also help to reduce noise and vibration.
3/8" x 3/8" x 3/8", brass, lead free, barb pex tee, for use with pex tubing & connected with stainless steel cinch clamps & cinch tool true value #608-743, astm f-876, astm f-877 to sdr-9 dimensional standards, nsf 14 & 61 for use in potable water systems, csa b137.5 standards, nsf cl-r certified for use in hot water systems where chlorinated 140 degree fahrenheit hot water can be constantly re-circulated, the wetted surface of this product contacted by consumable water contains less than 1/4 of 1 percent, 0.25%, of lead by weight, meets ab1953 california & vt s152 vermont low lead restrictions.
1/2" lead free brass barb insert tee, for connecting 3 pieces of 1/2" cross link polyethylene pex tubing, secure barb ends of fittings to pex pipe with tv #608933 cinch clamps & tv # 608-743 cinch tool, or copper crimp rings & crimp tool, immediately testable to well over 100 psi, 1/2" lead free brass barb insert x 1/2" female pipe thread swivel plastic nut faucet adapter elbow, for connecting 1/2" cross link polyethylene pex tubing at a 90 degree angle to 1/2" male iron pipe thread faucet shank, secure barb end of fitting to pex pipe with tv #608-933 cinch clamps & tv #608-743 cinch tool, or copper crimp rings & crimp tool, immediately testable to well over 100 psi, meets the new nsf/ansi standard 14-2009 & astm f 1807-9si standard for products intended for the transport of potable water, ansi/nsf standard 61 annex g for lead free compliance & the wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight to meet ab1953 California & vt s152
1/2" x 3/8" x 3/8", brass, lead free, barb pex tee, for use with pex tubing & connected with stainless steel cinch clamps & cinch tool tv #608-743, astm f-876, astm f-877 to sdr-9 dimensional standards, nsf 14 & 61 for use in potable water systems, csa b137.5 standards, nsf cl-r certified for use in hot water systems where chlorinated 140 degrees fahrenheit hot water can be constantly re-circulated, the wetted surface of this product contacted by consumable water contains less than 1/4 of 1 percent, 0.25%, of lead by weight, meets ab1953 california & vt s152 vermont low lead restrictions.
PVC Schedule 40 fitting that is for pressure systems where temperatures will not exceed 140° F. They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core. Installation requires the use of primer and solvent cement. All Charlotte Pipe products are manufactured in the USA.
1-1/4" x 3/4" White Reducer Bushing, Spigot x Slip, Used To Reduce The Size Of A Pipe, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.
Conforms to meet Standards: ASTM D 1784, ASTM D 2466, NSF 14 and 61
White fittings that are used in potable water applications
PVC schedule 40 pipe and pressure fittings are used in irrigation, underground sprinkler systems, swimming pools, outdoor applications and cold water supply lines
PVC Schedule 40 fitting that is for pressure systems where temperatures will not exceed 140° F. They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core. Installation requires the use of primer and solvent cement. All Charlotte Pipe products are manufactured in the USA.
1-1/2"x1" White Reducer Bushing, Spigot x Slip, Used To Reduce The Size Of A Pipe, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.
Conforms to meet Standards: ASTM D 1784, ASTM D 2466, NSF 14 and 61
White fittings that are used in potable water applications
PVC schedule 40 pipe and pressure fittings are used in irrigation, underground sprinkler systems, swimming pools, outdoor applications and cold water supply lines
PVC Schedule 40 fitting that is for pressure systems where temperatures will not exceed 140° F. They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core. Installation requires the use of primer and solvent cement. All Charlotte Pipe products are manufactured in the USA.
1-1/2" x 3/4" White Reducer Bushing, Spigot x Slip, Used To Reduce The Size Of A Pipe, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.
Conforms to meet Standards: ASTM D 1784, ASTM D 2466, NSF 14 and 61
White fittings that are used in potable water applications
PVC schedule 40 pipe and pressure fittings are used in irrigation, underground sprinkler systems, swimming pools, outdoor applications and cold water supply lines
