PVC Schedule 40 fitting that is for pressure systems where temperatures will not exceed 140° F. They are highly resilient, with high-tensile and high-impact strength. PVC Schedule 40 has better sound deadening qualities than PVC Schedule 40 DWV Foam Core and ABS Foam Core. Installation requires the use of primer and solvent cement. All Charlotte Pipe products are manufactured in the USA.
1/2", White, Slip x Slip x Slip x Slip Cross Provides 2 Simultaneous Horizontal Branches To A Vertical Vent Or Waste Line, Used In Sprinkler & Irrigation Systems, Meets The Requirements Of ASTM D 2466.
Conforms to meet Standards: ASTM D 1784, ASTM D 2466, NSF 14 and 61
White fittings that are used in potable water applications
PVC schedule 40 pipe and pressure fittings are used in irrigation, underground sprinkler systems, swimming pools, outdoor applications and cold water supply lines
Pipe & fittings are dark gray in color. Joined with solvent cement conforming to ASTM D2564. PVC Schedule 80 pressure fittings with straight, angular turns must be used. Do NOT use fittings with gradual sanitary turns for pressure systems. Application: Distribution of pressurized Liquids. Can be used in industrial applications. NOT for compressed air or gasses. Standards: ASTM D1785, ASTM D2467, NSF Standard 14, NSF Standard 61. Dimensional Standard: Schedule 80 Iron Pipe Size (IPS). Cell Class: 12454 (Type 1). Material Code: PVC 1120. Max. Working Temp: 140F. For special applications, threaded connections, unions and flanges, a temperature de-rating factor must be used to determine the pressure rating at temperatures hotter than 73F. Joining Method: Solvent Weld Joints - Solvent Cements must meet ASTM D2534. Primer should be IPS P-70 or Oatey Industrial Grade. May be flanged with Schedule 80 flanges. Threading PVC 80 pipe can be done. MIP and FIP adapters are available.
Pipe & fittings are dark gray in color. Joined with solvent cement conforming to ASTM D2564. PVC Schedule 80 pressure fittings with straight, angular turns must be used. Do NOT use fittings with gradual sanitary turns for pressure systems. Application: Distribution of pressurized Liquids. Can be used in industrial applications. NOT for compressed air or gasses. Standards: ASTM D1785, ASTM D2467, NSF Standard 14, NSF Standard 61. Dimensional Standard: Schedule 80 Iron Pipe Size (IPS). Cell Class: 12454 (Type 1). Material Code: PVC 1120. Max. Working Temp: 140F. For special applications, threaded connections, unions and flanges, a temperature de-rating factor must be used to determine the pressure rating at temperatures hotter than 73F. Joining Method: Solvent Weld Joints - Solvent Cements must meet ASTM D2534. Primer should be IPS P-70 or Oatey Industrial Grade. May be flanged with Schedule 80 flanges. Threading PVC 80 pipe can be done. MIP and FIP adapters are available.
Universal pipe connector, inner dimension connects to 3" pipe & outer dimension connects to 4" pipe, for use in connecting pvc pipe with plastic corrugated flex drain pipe.
3/8" ID X 5/8" OD x 50' Black PVC Fuel Hose, General Purpose, Suitable for use with Petroleum based products, Oil & Grease Resistant, Not For Under Hood Applications, 80 PSI at 70 Degrees Fahrenheit, Bulk Spool.
5/8" id x 3/4" od x 100', black, heater hose, meets the specifications of heat & ozone resistance for under the hood temperatures, high strength reinforcing resists coiling, system surge pressures & kinking, 40 psi.
Master plumber, 1" x 1-1/4" od x 50', clear, pvc tubing, manufactured with non-toxic fda compounds, can be used for flexible lines for low pressure air, water, liquids, beverages, chemicals & gases as well as drain lines for air conditioners & dehumidifiers, excellent resistance to mild acids & chemicals, see through design allows for visual flow, not for use with ice makers or petroleum based products, for use with hose barbs & clamps, temperature range 25 to 150 degrees fahrenheit, working pressure 25 psi at 70 degrees fahrenheit, tubing is marked every foot for easy measuring & cutting, dispenser box.
ABS/DWV, 1-1/2" Male Adapter, Hub x Male Iron Pipe, Adapts To Standard Female Pipe Threads, For Non-Pressure Drain, Waste & Vent Installation, Low Chemical Resistance, Black Material.
ABS/DWV, 1-1/2" Trap Adapter, Male Less Washer & Nut, Spigot x Slip Joint Thread, Used To Connect A Drain To A P-Trap, For Non-Pressure Drain, Waste & Vent Installation, Low Chemical Resistance, Black Material.
