3/8" brass polybutylene barb x 3/8" brass, lead free, pex coupling, makes a transition from polybutylene tubing to pex tubing & connected with stainless steel cinch clamps & cinch tool tv #608-743, astm f-876, astm f-877 to sdr-9 dimensional standards, nsf 14 & 61 for use in potable water systems, csa b137.5 standards, nsf cl-r certified for use in hot water systems where chlorinated 140 degrees fahrenheit hot water can be constantly re-circulated, the wetted surface of this product contacted by consumable water contains less than 1/4 of 1 percent, 0.25%, of lead by weight, meets ab1953 california & vt s152 vermont low lead restrictions.
1/2", pexlock coupling, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
3/8" x 1/2", pexlock reducing coupling, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
3/4" x 1/2" poly alloy barb insert pex elbow, for cross link polyethylene tubing for hot & cold water, use with true value #608-933 cinch clamp, need cinch tool true value #608-743 or copper crimp rings on cross link polyethylene pex tubing, after crimping you can immediately test each fitting to well over 100 psi, nsf listed poly alloy inserts, replacement for brass pex insert fittings to conform to california ab1953 low lead & vermont s152 low lead laws.
1/2" poly alloy barb insert x 1/2" female iron pipe swivel pex elbow, for cross link polyethylene tubing for hot & cold water, use with true value #608-933 cinch clamp, need cinch tool true value #608-743 or copper crimp rings on cross link polyethylene pex tubing, after crimping you can immediately test each fitting to well over 100 psi, nsf listed poly alloy inserts, replacement for brass pex insert fittings to conform to california ab1953 low lead & vermont s152 low lead laws.
3/8", pexlock elbow, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
3 count, 1/2" pexlock clamp, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
1" poly alloy barb insert pex end plug, for cross link polyethylene tubing for hot & cold water, use with true value #608-933 cinch clamp, need cinch tool true value #608-743 or copper crimp rings on cross link polyethylene pex tubing, after crimping you can immediately test each fitting to well over 100 psi, nsf listed poly alloy inserts, replacement for brass pex insert fittings to conform to california ab1953 low lead & vermont s152 low lead laws.
3/4", pexlock plug, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
1/2" pexlock cap, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
1-1/4" Plastic Insert Elbow, Poly x Poly. Poly insert fittings are connected to PE Polyethylene pipe with stainless steel clamps. For use with COLD water only. Do not use with compressed air or gases. Do not use in a dwelling. ASTM D-2609 Listed. NSF 14 and 16 Listed for potable water services. Fitting modifications voids warranty.
3/4" Male Pipe Thread Insert Elbow, Insert x Male. Poly insert fittings are connected to PE Polyethylene pipe with stainless steel clamps. For use with COLD water only. Do not use with compressed air or gases. Do not use in a dwelling. ASTM D-2609 Listed. NSF 14 and 16 Listed for potable water services. Fitting modifications voids warranty.
