Ideal for oil, coal, or heavy wood burner chimneys, the stainless steel Shelter chimney cap by HY-C Company is constructed of 100% 304 stainless steel and built to withstand the toughest of conditions. This cap's durability is rugged enough to tackle any application within 25 miles of a saltwater coast. Its high-quality construction includes a 24-gauge stainless steel hood with scalloped corners and straight cut edges, an 18-gauge 3/4" expanded stainless steel mesh, and a 16-gauge stainless steel base integrated for added strength. The outside mounting design engineers a maximum free air space allowing uninhibited chimney draft. Made in the USA and backed by HY-C's Lifetime Limited Warranty.
Fits outside tile dimensions: 11.5" x 11.5" to 13.5" x 13.5"
Made in U.S.A.
Quick and easy installation requires only a screwdriver
Limited Lifetime Warranty
Optional Leg Kit (SCLK): For use when the masonry flue tile does not extend above the crown of the chimney
Expanded metal mesh turned inward at base allows cover to rest firmly on flue tile, closing any openings to protect against nuisance wildlife
Sure-Temp, 8" x 12", 8T-12, Stainless Steel Pipe Lock Band, All Fuel Double Wall Insulated Chimney Pipe, With Locking Band, Solid Pack Insulation, Type HT 2100 Degrees, UL Rated, Class A.
8", 8t-rbk roof brace kit, a roof brace kit can be used whenever there is a need to stabilize the chimney above the roof top level, the roof brace kit should be used at a midpoint on the chimney.
The Roof Brace Lkit should be used at a midpoint on the chimney. Braces adjust from 4 to 6 feet.
A Roof Brace Kit can be used whenever there is a need to stabilize the chimney above the roof brace.
Underwriters Laboratories UL 103 HT Certified
System Temperature Rating 1000 F Degrees Maximum Continuous Operating Temperature
System Temperature rating: 1400 F Degrees Maximum 60 Minutes
System Temperature Rating: 2100 Degrees F Maximum Test 10 Minutes
8", 8t-af12 adjustable roof flashing, pitch adjusts 6/12 to 12/12, for sealing the opening where the chimney penetrates the roof & to divert rain & snow from the roof & away from the chimney system.
Pitch adjusts from 6/12 to 12/12
Flashings are used to seal the opening where the chimney penetrates the roof and to divert rain and snow away from the chimney system
Underwriters Laboratories UL 103 HT Certified
System Requires 2 inch airspace to combustibles.
System Temperature Rating 1000 F Degrees Maximum Continuous Operating Temperature
System Temperature rating: 1400 F Degrees Maximum 60 Minutes
System Temperature Rating: 2100 Degrees F Maximum Test 10 Minutes
Check Appliance Installation Instructions For Details
Industry Best Warrantty Contact Selkirk For Details
4vp-60, 4" x 60", pellet stove pipe, type l vent, tested & listed to ul-641 standard & ul-103 standard, proven coupling joint connects in seconds to assure joint integrity, gasketed joint design, double wall design with 1/4" airspace, inner wall 304 stainless steel, outer wall paintable galvanized, rolled over male end eliminates sharp edges, 1" clearance to combustibles.
6t sb, support box, intended for use when installing chimney in a frame, in a mobile home, or in a ceiling under a narrow section of roof, provides a finished installation at the ceiling level & will support up to 20' of a 6" diameter chimney, also provides shielding from insulation when installed in an unoccupied attic space, assembly is comprised of a black box designed for installation inside 16" o.c. Joists, a cylindrical shield, support bucket, ceiling trim & 4 screws.
Universal Roof Support Assembly, Gives You Flexibility Or Securing The 5,6, 7 Or 8" Diameter Chimney With A Heavy Duty Band Allows You To Slide The Installed Length Vertically To Properly Position This Section In The System, Installation Requirement Are The Same As The Standard Roof Support Package, Can Hold 30' Of Pipe, Only 20' Can Be Below.
Dsp6tl, 6" diameter, matte black, telescopic double wall stove pipe, includes finishing band, adjustable form 38" to 68", easily removable for inspection & cleaning, eliminates the need to cut pipe, for installed lengths, subtract 13/8" per joint.
