DSP6TE-1, 6", Black Matte Outer Finish, Double Wall Smoke Pipe Tee, With Cap, Use With A Vertical Insulated Chimney To Provide Easy Access For Inspection & Cleaning, 6" Clearance To Combustibles, Lasts Significantly Longer Than Single Wall Pipe, High Quality, Scratch Resistant Black Finish, Less Chance Of Moisture Or Soot Build Up Within The Vent, Increases Efficiency, Less Creosote Build Up, Inner Liner Is Made From Corrosion Resistant 400 Series Stainless Steel, Listed, Certified & Labeled To UL Safety Standards, Lifetime Warranty.
Ideal for oil, coal, or heavy wood burner chimneys, the stainless steel Shelter chimney cap by HY-C Company is constructed of 100% 304 stainless steel and built to withstand the toughest of conditions. This cap's durability is rugged enough to tackle any application within 25 miles of a saltwater coast. Its high-quality construction includes a 24-gauge stainless steel hood with scalloped corners and straight cut edges, an 18-gauge 3/4" expanded stainless steel mesh, and a 16-gauge stainless steel base integrated for added strength. The outside mounting design engineers a maximum free air space allowing uninhibited chimney draft. Made in the USA and backed by HY-C's Lifetime Limited Warranty.
Fits outside tile dimensions: 7.5" x 11.5" to 9.5" x 13.5"
Made in U.S.A.
Quick and easy installation requires only a screwdriver
Limited Lifetime Warranty
Optional Leg Kit (SCLK): For use when the masonry flue tile does not extend above the crown of the chimney
Expanded metal mesh turned inward at base allows cover to rest firmly on flue tile, closing any openings to protect against nuisance wildlife
4"d x 60"l, pellet vent pipe, fully unitized, twist lock construction, can be used in both vertical & horizontal installations, 4-1/2" od, designed for stoves that burn wood pellets, double wall & air insulated pipe, inner wall of .012" super ferritic stainless steel, outer wall .018" laser welded galvalume, patent pending venting for stoves & inserts that use wood pellets, ul listed for 3" clearance to combustibles in USA & Canada. required for venting pellet appliance above 4,000 ft.
PELLET VENT PIPE, 4"X60"
DOUBLE WALL PIPE AIR INSULATED DESIGN
FOR USE AT ELEVATION 4000 FEET ABOVE SEA LEVEL
RATED FOR CONTINUOUS USE FLUE TEMPS UP TO 570 DEGREES F
4" pellet vent clean out tee, use as 90 degree offset, swivel branch for easy alignment, removable twist lock clean-out cap, required 4" venting by pellet appliance manufacturers when venting above 4,000 ft.
6"id x 24"l, duraplus chimney pipe, designed for appliances tested & listed for use with wood stoves, fireplaces, furnaces, boilers, stoves, ranges, water heaters or other appliances fueled by wood, oil, coal, or gas, 1" insulation blanket, 10" od.
6t-tf, flat & low pitch flashing, use to seal flat & low pitch roof openings up to 2/12 pitch & to divert rain & snow down from the roof & away from the chimney system, flashing comes with a roof shield set, flashings are used to seal the opening where the chimney penetrates the roof.
