1/2" x 7/8", swivel toilet connection elbow, easy to install, connects pex tubing to a 7/8" male threaded connection at a 90 degree angle, suitable for potable water distribution & hydronic heating applications, sharkbite pex poly alloy barb fittings can be used in both stainless steel clamp system or copper crimp ring system.
3/4", pexlock elbow, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
1/2" x 3/4" female garden hose, pexlock swivel elbow, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
3 count, 1", pexlock clamp, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
1" poly alloy barb insert pex tee, for cross link polyethylene tubing for hot & cold water, use with true value #608-933 cinch clamp, need cinch tool true value #608-743 or copper crimp rings on cross link polyethylene pex tubing, after crimping you can immediately test each fitting to well over 100 psi, nsf listed poly alloy inserts, replacement for brass pex insert fittings to conform to california ab1953 low lead & vermont s152 low lead laws.
1/2", pexlock tee, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
1" Insert x 1-1/2" male reducing adapter. Poly insert fittings are connected to PE Polyethylene pipe with stainless steel clamps. For use with COLD water only. Do not use with compressed air or gases. Do not use in a dwelling. ASTM D-2609 Listed. NSF 14 and 16 Listed for potable water services. Fitting modifications voids warranty.
2" plastic insert elbow, poly x poly. poly insert fittings are connected to pe polyethylene pipe with stainless steel clamps. for use with cold water only. do not use with compressed air or gases. do not use in a dwelling. astm d-2609 listed. nsf 14 and 16 listed for potable water services. fitting modifications voids warranty.
1-1/4", insert x male iron pipe, combination elbow, used to change direction, adapts to standard female pipe threads, teflon thread tape is recommended for threaded joints. poly insert fittings are connected to pe polyethylene pipe with stainless steel clamps. for use with cold water only. do not use with compressed air or gases. do not use in a dwelling. astm d-2609 listed. nsf 14 and 16 listed for potable water services. fitting modifications voids warranty.
1-1/4" barb x 1-1/4" barb x 1/2" female iron pipe insert tee. poly insert fittings are connected to pe polyethylene pipe with stainless steel clamps. for use with cold water only. do not use with compressed air or gases. do not use in a dwelling. astm d-2609 listed. nsf 14 and 16 listed for potable water services. fitting modifications voids warranty.
