Filters
2 columns grid
3 columns grid
4 columns grid
List
More
Show
, , , ,

Pipe Fitting, Adapter, Lead Free Brass, 3/8 Compression x 5/8 In. Copper x Copper

$4.29
3/8" compression x 5/8" copper x copper adapter, lead free compliant product which meets public law 111-380.
  • Compliant Product Which Meets California AB-1953
  • Compliant Product Which Meets Vermont SB-152
  • Three Piece Construction - Nut, Sleeve (Or Ferrule) And Body
  • Use With Copper, Aluminum Or Plastic Tubing (Plastic requires 60P Sleeve And 61P Insert)
  • Negavtive 65 Degreees to Plus 250 Degrees F. Temperature Range
  • Standard Fittings Use Short Nuts. Long Nuts Are Available For Higher Vibrations Applications.
  • To Buy Compressions Fittings with Long Nut, Please Add a "1" In Front Of The Part Number. (i.e. 68 = 168)
  • Easy To Disassemble, No Flaring Tool Required
  • Primary Uses: Water, Gasoline, Oil and Vacuum Lines
  • To Assemble:
  • 1. Cut Smooth, Square End On Tubbing
  • 2. Slide Nut, Then Sleeve Onto Tube. Thread Must Face End.
  • 3. Insert Tube Into Fitting
  • 4. Thread Nut Onto Fitting Until Snug, then as follows: Up To 1/4 Inch = 1-1/4 Turns, 5/16 Inch = 1-3/4 Turns, 3/8 Inch and Up = 2-1/4 Turns
Add to cart Add to Compare
, , , ,

Brass Compression Cap, Lead Free, 3/8 In.

$4.29
3/8" compression cap, lead free compliant product which meets public law 111-380.
Add to cart Add to Compare
, , , ,

Pipe Fitting, Connector, Lead Free Brass, 5/16 Compression x 1/4 In. MPT

$4.29
5/16" compression x 1/4" male pipe thread, brass connector, lead free compliant product which meets public law 111-380.
  • Compliant Product Which Meets California AB-1953
  • Compliant Product Which Meets Vermont SB-152
  • Three Piece Construction - Nut, Sleeve (Or Ferrule) And Body
  • Use With Copper, Aluminum Or Plastic Tubing (Plastic requires 60P Sleeve And 61P Insert)
  • Negavtive 65 Degreees to Plus 250 Degrees F. Temperature Range
  • Standard Fittings Use Short Nuts. Long Nuts Are Available For Higher Vibrations Applications.
  • To Buy Compressions Fittings with Long Nut, Please Add a "1" In Front Of The Part Number. (i.e. 68 = 168)
  • Easy To Disassemble, No Flaring Tool Required
  • Primary Uses: Water, Gasoline, Oil and Vacuum Lines
  • To Assemble:
  • 1. Cut Smooth, Square End On Tubbing
  • 2. Slide Nut, Then Sleeve Onto Tube. Thread Must Face End.
  • 3. Insert Tube Into Fitting
  • 4. Thread Nut Onto Fitting Until Snug, then as follows: Up To 1/4 Inch = 1-1/4 Turns, 5/16 Inch = 1-3/4 Turns, 3/8 Inch and Up = 2-1/4 Turns
Add to cart Add to Compare
, , , ,

Elbow, Brass, 90-Degree, Compression, Male, 1/4 x 1/8 In.

$4.29
1/4" Compression x 1/8" Male Pipe Thread, Brass, 90 Degree Elbow, Lead Free Compliant Product Which Meets Public Law 111-380, Bulk.
  • Compliant Product Which Meets California AB-1953
  • Compliant Product Which Meets Vermont SB-152
  • Three Piece Construction - Nut, Sleeve (Or Ferrule) And Body
  • Use With Copper, Aluminum Or Plastic Tubing (Plastic requires 60P Sleeve And 61P Insert)
  • Negavtive 65 Degreees to Plus 250 Degrees F. Temperature Range
  • Standard Fittings Use Short Nuts. Long Nuts Are Available For Higher Vibrations Applications.
  • To Buy Compressions Fittings with Long Nut, Please Add a "1" In Front Of The Part Number. (i.e. 68 = 168)
  • Easy To Disassemble, No Flaring Tool Required
  • Primary Uses: Water, Gasoline, Oil and Vacuum Lines
  • To Assemble:
  • 1. Cut Smooth, Square End On Tubbing
  • 2. Slide Nut, Then Sleeve Onto Tube. Thread Must Face End.
  • 3. Insert Tube Into Fitting
  • 4. Thread Nut Onto Fitting Until Snug, then as follows: Up To 1/4 Inch = 1-1/4 Turns, 5/16 Inch = 1-3/4 Turns, 3/8 Inch and Up = 2-1/4 Turns
Add to cart Add to Compare
, , , ,

Brass Compression Stiffener & Sleeve, Lead Free, 1/2 In., 2-Pk.

$4.29
2 pack, compression stiffener & sleeve, for use with 1/2" od plastic tubing, lead free compliant product, lead free compliant product which meets public law 111-380.
Add to cart Add to Compare
, , , ,

Pipe Fitting, Flare Connector, Lead Free Brass, 1/2 x 3/8 In. FPT

$4.29
1/2" flare x 3/8" female pipe thread, brass, flare connector, lead free compliant product which meets public law 111-380.
  • Compliant Product Which Meets California AB-1953
  • Compliant Product Which Meets Vermont SB-152
  • Use With Copper, Brass, Aluminum, Or Steel Tubing
  • Negavtive 65 Degreees to Plus 250 Degrees F. Temperature Range
  • Standard Fittings Use Short Nuts. Long Nuts Are Available For Higher Vibrations Applications.
  • Resists Mechanical Pullout
  • Easy To Disassemble And Can Be Reassembled Many Times, With No Effect On The Seal
  • Primary Uses: Fuel Equipment, Plumbing, Gases, Refrigeration, and Vacumm Lines.
  • To Assemble:
  • 1. Cut Smooth, Square End On Tubbing
  • 2. Slide Nut onto Tube - Threads Facing End
  • 3. Flare End Of Tube
  • 4. Thread Nut to Body Until Snug, Then 1/6th Turn
Add to cart Add to Compare
, , , ,

Pipe Fitting, Flare Connector, Lead Free Brass, 3/8 In. Flare x 3/8 In. FPT

$4.29
3/8" flare x 3/8" female pipe thread, brass, flare connector, lead free compliant product which meets public law 111-380.
  • Compliant Product Which Meets California AB-1953
  • Compliant Product Which Meets Vermont SB-152
  • Two Piece Construction - Nut And Body
  • Use With Copper, Brass, Aluminum, Or Steel Tubing
  • Negavtive 65 Degreees to Plus 250 Degrees F. Temperature Range
  • Standard Fittings Use Short Nuts. Long Nuts Are Available For Higher Vibrations Applications.
  • Resists Mechanical Pullout
  • Easy To Disassemble And Can Be Reassembled Many Times, With No Effect On The Seal
  • Primary Uses: Fuel Equipment, Plumbing, Gases, Refrigeration, and Vacumm Lines.
  • To Assemble:
  • 1. Cut Smooth, Square End On Tubbing
  • 2. Slide Nut onto Tube - Threads Facing End
  • 3. Flare End Of Tube
  • 4. Thread Nut to Body Until Snug, Then 1/6th Turn
Add to cart Add to Compare
, , , ,

Pipe Fitting, Flare Connector, Lead Free Brass, 3/8 In. Flare x 1/2 In. MPT

$4.29
3/8" flare x 1/2" male pipe thread, brass, flare connector, lead free compliant product which meets public law 111-380.
  • Compliant Product Which Meets California AB-1953
  • Compliant Product Which Meets Vermont SB-152
  • Two Piece Construction - Nut And Body
  • Use With Copper, Brass, Aluminum, Or Steel Tubing
  • Negavtive 65 Degreees to Plus 250 Degrees F. Temperature Range
  • Standard Fittings Use Short Nuts. Long Nuts Are Available For Higher Vibrations Applications.
  • Resists Mechanical Pullout
  • Easy To Disassemble And Can Be Reassembled Many Times, With No Effect On The Seal
  • Primary Uses: Fuel Equipment, Plumbing, Gases, Refrigeration, and Vacumm Lines.
  • To Assemble:
  • 1. Cut Smooth, Square End On Tubbing
  • 2. Slide Nut onto Tube - Threads Facing End
  • 3. Flare End Of Tube
  • 4. Thread Nut to Body Until Snug, Then 1/6th Turn
Add to cart Add to Compare
, , , ,

Brass Flare Connector, Lead Free, 1/4 x 1/4 In. FIP

$4.29
1/4" flare x 1/4" female iron pipe thread connector, flare to female pipe thread, recloseable blister box, lead free compliant product which meets public law 111-380.
Add to cart Add to Compare
, , , ,

Brass Pipe Fitting, Flare Connector, 3/8 x 3/8 In. FPT, 9/16 x 24 In. Flare

$4.29
3/8" Flare x 3/8" Female Pipe Thread, Brass Flare Connector, 9/16" x 24 Flare Thread, Flare To Female Iron Pipe, Bulk.
Add to cart Add to Compare
, , , ,

Pipe Fitting, Flare Nut, Brass, 5/8 In.

$4.29
5/8", brass, economy short, flare nut, lead free compliant product which meets public law 111-380.
  • Compliant Product Which Meets California AB-1953
  • Compliant Product Which Meets Vermont SB-152
  • Two Piece Construction - Nut And Body
  • Use With Copper, Brass, Aluminum, Or Steel Tubing
  • Negavtive 65 Degreees to Plus 250 Degrees F. Temperature Range
  • Standard Fittings Use Short Nuts. Long Nuts Are Available For Higher Vibrations Applications.
  • Resists Mechanical Pullout
  • Easy To Disassemble And Can Be Reassembled Many Times, With No Effect On The Seal
  • Primary Uses: Fuel Equipment, Plumbing, Gases, Refrigeration, and Vacumm Lines.
  • To Assemble:
  • 1. Cut Smooth, Square End On Tubbing
  • 2. Slide Nut onto Tube - Threads Facing End
  • 3. Flare End Of Tube
  • 4. Thread Nut to Body Until Snug, Then 1/6th Turn
Add to cart Add to Compare
, , , ,

Brass Threaded Short Rod Nut, Lead Free, 1/4 In., 2-Pk.

$4.29
2 pack, 1/4" short rod nut, lead free compliant product which meets public law 111-380, carded.
Add to cart Add to Compare
Home
Shop
Search
More
More