1/2" x 1/2", pexlock female swivel adapter, for installation use a pair of slip joint pliers, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
3/8" x 1/2", pexlock female swivel adapter, for installation use a pair of slip joint pliers, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
1" poly alloy barb insert pex elbow, for cross link polyethylene tubing for hot & cold water, use with true value #608-933 cinch clamp, need cinch tool true value #608-743 or copper crimp rings on cross link polyethylene pex tubing, after crimping you can immediately test each fitting to well over 100 psi, nsf listed poly alloy inserts, replacement for brass pex insert fittings to conform to california ab1953 low lead & vermont s152 low lead laws.
1/2" x 1/2" male pipe thread, pexlock elbow, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
3/4" x 1/2", pexlock reducing elbow, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
1", pexlock pex crimp plug, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
Zurn qicktite, 1/2" thread x 1/4" nominal tube size, nut ring cone set, ideal for remodeling & repair jobs, qicktite nut-ring-cone connections are for use with copper tube size pipe including pex, copper, cpvc, & polybutylene in potable water systems only, requires no special tools, solvents, or chemicals.
1-1/4" insert x 1" male iron pipe, reducing male adapter.Poly insert fittings are connected to PE Polyethylene pipe with stainless steel clamps. For use with COLD water only. Do not use with compressed air or gases. Do not use in a dwelling. ASTM D-2609 Listed. NSF 14 and 16 Listed for potable water services. Fitting modifications voids warranty.
1-1/4" Insert x 1-1/2" Male Iron Pipe, Reducing Male adapter. Poly insert fittings are connected to PE Polyethylene pipe with stainless steel clamps. For use with COLD water only. Do not use with compressed air or gases. Do not use in a dwelling. ASTM D-2609 Listed. NSF 14 and 16 Listed for potable water services. Fitting modifications voids warranty.
