Couplings are used to join poly pipe in a straight line in cold water applications only. Can be used underground or above ground in water service and agriculture uses. Join fittings to pipe with stainless steel hose clamps. NSF Approved. Nylon insert fittings are tougher and will absorb shock better than poly insert fittings.
1/2-Inch Brass Pex Barb x 1/2-Inch Male, Lead Free, Sweat Adapter, Makes A Sweat Transition From Copper Pipe To Pex Tubing & Connected With Stainless Steel Cinch Clamps & Cinch Tool True Value #608-743, ASTM F-876, ASTM F-877 To SDR-9 Dimensional Standards, NSF 14 & 61 For Use In Potable Water Systems, CSA B137.5 Standards, NSF CL-R Certified For Use In Hot Water Systems Where Chlorinated 140 Degree Fahrenheit Hot Water Can Be Constantly Re-Circulated, The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 1/4 Of 1 Percent, 0.25%, Of Lead By Weight, Meets AB1953 California & VT S152 Vermont Low Lead Restrictions.
1/2" Lead Free Brass Barb Insert x 1/2" Female Pipe Thread Swivel Plastic Nut Faucet Adapter, For Connecting 1/2" Cross Link Polyethylene Pex Tubing To 1/2" Male Iron Pipe Thread Faucet Shank, Secure Barb End Of Fitting To Pex Pipe With TV# 608933 Cinch Clamps & TV# 608743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
1/2" x 1/2" male pipe thread, pexlock male adapter, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
3/4" x 1/2", pexlock reducing coupling, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
1/2", pexlock elbow, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
1/2" x 3/8", male pipe thread, pexlock elbow, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
3/8" x 1/2", female pipe thread, pexlock swivel elbow, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
3 count, 3/4", pexlock clamp, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
Zurn qicktite, 1/2" thread x 3/8" nominal tube size, nut ring cone set, ideal for remodeling & repair jobs, qicktite nut-ring-cone connections are for use with copper tube size pipe including pex, copper, cpvc, & polybutylene in potable water systems only, requires no special tools, solvents, or chemicals.
