3/8", brass, lead free, barb pex elbow, for use with pex tubing & connected with stainless steel cinch clamps & cinch tool tv #608-743, astm f-876, astm f-877 to sdr-9 dimensional standards, nsf 14 & 61 for use in potable water systems, csa b137.5 standards, nsf cl-r certified for use in hot water systems where chlorinated 140 degrees fahrenheit hot water can be constantly re-circulated, the wetted surface of this product contacted by consumable water contains less than 1/4 of 1 percent, 0.25%, of lead by weight, meets ab1953 california & vt s152 vermont low lead restrictions.
1", lead free brass barb insert elbow, for connecting 2 pieces of 1" cross link polyethylene pex tubing, secure barb ends of fittings to pex pipe with tv #597-556 cinch clamps & tv #608-743 cinch tool, or tv #597-325 copper crimp rings & tv #597-693 crimp tool, immediately testable to well over 100 psi, meets the new nsf/ansi standard 14-2009 & astm f 1807-9si standard for products intended for the transport of potable water, ansi/nsf standard 61 annex g for lead free compliance & the wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight to meet ab1953 california & vt s152 vermont low lead restrictions.
3/8" x 1/2", pex barb swivel elbow, use to connect pex tubing to a male threaded connection at a 90 degree angle, sharkbite pex barb fittings are compatible for potable water distribution & hydronic heating applications, can be used in both stainless steel clamp system or a copper crimping system.
1/2" x 1/2", 90 degree, evopex push to connect elbow, fast & easy way to connect pipe without the need for special tools, glue or soldering, 200 degrees fahrenheit, 160 psi maximum pressure, lead free, pex compatible pipe material, for water supply.
1/2", quick connect cap, push fittings hold up to 250 psi, 1 piece, no parts to assemble or lose, code approved for behind wall without access & direct in ground burial installations, nsf-14, nsf-61, csa/astm & upc code listed & approved, replacement for qest & flare it type fittings.
3/4", pexlock tee, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
1/2" x 1/2" swivel x 1/2", pexlock swivel tee, rated at 180 degrees at 100 psi & 73 degrees at 200 psi, nsf & csa approved for new building behind wall & underground application, for installation use a pair of slip joint pliers, 25 year warranty.
Easy Installation
NSF and CSA Approved
25 Year Warranty
Can be used with PEX A, B, and C
No metal to corrode, oxidize or pit
No special install tools that require calibration
Removable clamp. Clamp on/off with no degradation of PEXLock
3/8", 1/2", 3/4", & 1" sizes
A high grade malleable polymer that resists freezing, cracking, and extreme heat
1/2" Poly Female Pipe Thread Insert Adapter, Plastic x Female. Poly insert fittings are connected to PE Polyethylene pipe with stainless steel clamps. For use with COLD water only. Do not use with compressed air or gases. Do not use in a dwelling. ASTM D-2609 Listed. NSF 14 and 16 Listed for potable water services. Fitting modifications voids warranty.
3/4" Poly Female Pipe Thread Insert Adapter, Plastic x Female. Poly insert fittings are connected to PE Polyethylene pipe with stainless steel clamps. For use with COLD water only. Do not use with compressed air or gases. Do not use in a dwelling. ASTM D-2609 Listed. NSF 14 and 16 Listed for potable water services. Fitting modifications voids warranty.
