PVC fittings are for drain, waste and vent purposes. They are used in gravity-fed waste elimination systems and are for Non-Pressure systems. To be installed with solvent cementing, threading, flanging, and roll-grooved joining. All Charlotte Pipe products are manufactured in the USA
White fittings used in sanitary drain, waste, and vent (DWV), sewer and storm drainage applications
Are used in gravity-fed waste elimination systems and are for Non-Pressure systems
Not intended for pressure use
For use where systems will not exceed 140° F
Conforms to meet Standards: ASTM D 1784, ASTM D 2665, ASTM D 3311 and NSF 14
Require no special tools for cutting and to be installed with solvent cement
Pipe & fittings are dark gray in color. Joined with solvent cement conforming to ASTM D2564. PVC Schedule 80 pressure fittings with straight, angular turns must be used. Do NOT use fittings with gradual sanitary turns for pressure systems. Application: Distribution of pressurized Liquids. Can be used in industrial applications. NOT for compressed air or gasses. Standards: ASTM D1785, ASTM D2467, NSF Standard 14, NSF Standard 61. Dimensional Standard: Schedule 80 Iron Pipe Size (IPS). Cell Class: 12454 (Type 1). Material Code: PVC 1120. Max. Working Temp: 140F. For special applications, threaded connections, unions and flanges, a temperature de-rating factor must be used to determine the pressure rating at temperatures hotter than 73F. Joining Method: Solvent Weld Joints - Solvent Cements must meet ASTM D2534. Primer should be IPS P-70 or Oatey Industrial Grade. May be flanged with Schedule 80 flanges. Threading PVC 80 pipe can be done. MIP and FIP adapters are available.
Pipe & fittings are dark gray in color. Joined with solvent cement conforming to ASTM D2564. PVC Schedule 80 pressure fittings with straight, angular turns must be used. Do NOT use fittings with gradual sanitary turns for pressure systems. Application: Distribution of pressurized Liquids. Can be used in industrial applications. NOT for compressed air or gasses. Standards: ASTM D1785, ASTM D2467, NSF Standard 14, NSF Standard 61. Dimensional Standard: Schedule 80 Iron Pipe Size (IPS). Cell Class: 12454 (Type 1). Material Code: PVC 1120. Max. Working Temp: 140F. For special applications, threaded connections, unions and flanges, a temperature de-rating factor must be used to determine the pressure rating at temperatures hotter than 73F. Joining Method: Solvent Weld Joints - Solvent Cements must meet ASTM D2534. Primer should be IPS P-70 or Oatey Industrial Grade. May be flanged with Schedule 80 flanges. Threading PVC 80 pipe can be done. MIP and FIP adapters are available.
3/4" PVC Compression Repair Coupling, Nuts With Rubber Gaskets, Rated At 150 PSI At 73 Degree Fahrenheit, For Use In Cold Water Applications On Galvanized Or Plastic Pipe.
1/8" x Close, 3/4" Stainless Steel Pipe Nipple, Type 304 Stainless, 150 LB Rated, Lead Free Product, Male Pipe Thread, Both Ends, Use To Connect Or Extend Pipe Or Fittings, Carded Clam Shell.
3/4" ID x 1 1/8" OD x 75', Red, Utility Hose, High Quality, Multi-Purpose, For Air, Water & Agricultural Spray Applications, Used Over A Wide Temperature Range, Reinforced With Spiral Polyester, Is Heat, Ozone & Weather Resistant EPDM, Do Not Use With Petroleum Based Products, Contractor Grade, Limited Oil Resistance, Temperature Range Minus 40 Degrees Fahrenheit To 190 Degrees Fahrenheit, Working Pressure 200 PSI At 70 Degrees Fahrenheit, Bulk Spool.
