Tees are used to provide a branch supply line from a main line of poly pipe in cold water applications only. They can be used underground and above ground for water service and agriculture uses. Join fittings to pipe with stainless steel hose clamps. NSF approved. These tees are tougher and will absorb shock better than poly insert fittings.
1/2" Poly Alloy Barb Insert x 3/4" Poly Alloy Male Pipe Thread Adapter, For Cross Link Polyethylene Tubing For Hot & Cold Water, Use With True Value #608-933 Cinch Clamp, Need Cinch Tool True Value #608-743 Or Copper Crimp Rings On Cross Link Polyethylene Pex Tubing, After Crimping You Can Immediately Test Each Fitting To Well Over 100 PSI, NSF Listed Poly Alloy Inserts, Replacement For Brass Pex Insert Fittings To Conform To California Ab1953 Low Lead & Vermont S152 Low Lead Laws.
1/2" x 3/8", brass, lead free, barb pex coupling, for use with pex tubing & connected with stainless steel cinch clamps & cinch tool true value #608-743, astm f-876, astm f-877 to sdr-9 dimensional standards, nsf 14 & 61 for use in potable water systems, csa b137.5 standards, nsf cl-r certified for use in hot water systems where chlorinated 140 degree fahrenheit hot water can be constantly re-circulated, the wetted surface of this product contacted by consumable water contains less than 1/4 of 1 percent, 0.25%, of lead by weight, meets ab1953 california & vt s152 vermont low lead restrictions.
3/8" x 3/8", lead free, brass barb pex coupling, for use with pex tubing & connected with stainless steel cinch clamps & cinch tool true value #608-743, astm f-876, astm f-877 to sdr-9 dimensional standards, nsf 14 & 61 for use in potable water systems, csa b137.5 standards, nsf cal-r certified for use in hot water systems where chlorinated 140 degree fahrenheit, hot water can be constantly re-circulated, wetted surface of this product contacted by consumable water contains less than 1/4 of 1 percent of lead by weight, meets ab1953 california & vt s152 vermont low lead restrictions.
3/4" x 1/2", lead free brass barb insert coupling, for connecting 3/4" & 1/2" pieces of cross link polyethylene pex tubing, secure 3/4" barb end of fitting to 3/4" pex pipe with tv #608-826 cinch clamps & tv #608-743 cinch tool & 1/2" barb end of fitting to 1/2" pex pipe with tv #608-933 cinch clamps & tv #608-743 cinch tool, or copper crimp rings & crimp tool, immediately testable to well over 100 psi, meets the new nsf/ansi standard 14-2009 & astm f 1807-9si standard for products intended for the transport of potable water, ansi/nsf standard 61 annex g for lead free compliance & the wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight to meet ab1953 California & vt s152 Vermont low lead restrictions.
1/2", Lead Free Brass Barb Insert Coupling, For Connecting 2 Pieces Of 1/2" Cross Link Polyethylene Pex Tubing, Secure Barb Ends Of Fittings To Pex Pipe With TV# 608933 Cinch Clamps & TV# 608743 Cinch Tool, Or Copper Crimp Rings & Crimp Tool, Immediately Testable To Well Over 100 PSI, Meets The New NSF/ANSI Standard 14-2009 & ASTM F 1807-9SI Standard For Products Intended For The Transport Of Potable Water, ANSI/NSF Standard 61 Annex G For Lead Free Compliance & The Wetted Surface Of This Product Contacted By Consumable Water Contains Less Than 0.25% Of Lead By Weight To Meet AB1953 California & VT S152 Vermont Low Lead Restrictions.
3/4" poly alloy barb insert pex coupling, for cross link polyethylene tubing for hot & cold water, use with true value #608-933 cinch clamp, need cinch tool true value #608-743 or copper crimp rings on cross link polyethylene pex tubing, after crimping you can immediately test each fitting to well over 100 psi, nsf listed poly alloy inserts, replacement for brass pex insert fittings to conform to california ab1953 low lead & vermont s152 low lead laws.
3/4" lead free brass barb insert plug, for pressure testing 3/4" cross link polyethylene pex tubing, secure 3/4" barb end of fitting to 3/4" pex pipe with tv #608-826 cinch clamps & tv #608-743 cinch tool, or copper crimp rings & crimp tool, immediately testable to well over 100 psi, meets the new nsf/ansi standard 14-2009 & astm f 1807-9si standard for products intended for the transport of potable water, ansi/nsf standard 61 annex g for lead free compliance & the wetted surface of this product contacted by consumable water contains less than 0.25% of lead by weight to meet ab1953 california & vt s152 vermont low lead restrictions.
3/4" poly alloy barb insert pex tee, for cross link polyethylene tubing for hot & cold water, use with true value #608-933 cinch clamp, need cinch tool true value #608-743 or copper crimp rings on cross link polyethylene pex tubing, after crimping you can immediately test each fitting to well over 100 psi, nsf listed poly alloy inserts, replacement for brass pex insert fittings to conform to california ab1953 low lead & vermont s152 low lead laws.
3/4" x 3/4" x 1/2" poly alloy barb insert pex tee, for cross link polyethylene tubing for hot & cold water, use with true value #608-933 cinch clamp, need cinch tool true value #608-743 or copper crimp rings on cross link polyethylene pex tubing, after crimping you can immediately test each fitting to well over 100 psi, nsf listed poly alloy inserts, replacement for brass pex insert fittings to conform to california ab1953 low lead & vermont s152 low lead laws.
3/4" x 1/2" x 3/4", sharkbite pex poly alloy barb reducing tee, compatible for potable water distribution & hydronic heating applications, can be used in stainless steel clamp system or a copper crimp ring system, not included.