8", 8t-rbk roof brace kit, a roof brace kit can be used whenever there is a need to stabilize the chimney above the roof top level, the roof brace kit should be used at a midpoint on the chimney.
The Roof Brace Lkit should be used at a midpoint on the chimney. Braces adjust from 4 to 6 feet.
A Roof Brace Kit can be used whenever there is a need to stabilize the chimney above the roof brace.
Underwriters Laboratories UL 103 HT Certified
System Temperature Rating 1000 F Degrees Maximum Continuous Operating Temperature
System Temperature rating: 1400 F Degrees Maximum 60 Minutes
System Temperature Rating: 2100 Degrees F Maximum Test 10 Minutes
8", 8t-af12 adjustable roof flashing, pitch adjusts 6/12 to 12/12, for sealing the opening where the chimney penetrates the roof & to divert rain & snow from the roof & away from the chimney system.
Pitch adjusts from 6/12 to 12/12
Flashings are used to seal the opening where the chimney penetrates the roof and to divert rain and snow away from the chimney system
Underwriters Laboratories UL 103 HT Certified
System Requires 2 inch airspace to combustibles.
System Temperature Rating 1000 F Degrees Maximum Continuous Operating Temperature
System Temperature rating: 1400 F Degrees Maximum 60 Minutes
System Temperature Rating: 2100 Degrees F Maximum Test 10 Minutes
Check Appliance Installation Instructions For Details
Industry Best Warrantty Contact Selkirk For Details
4vp-60, 4" x 60", pellet stove pipe, type l vent, tested & listed to ul-641 standard & ul-103 standard, proven coupling joint connects in seconds to assure joint integrity, gasketed joint design, double wall design with 1/4" airspace, inner wall 304 stainless steel, outer wall paintable galvanized, rolled over male end eliminates sharp edges, 1" clearance to combustibles.
OEM replacement media pad set, MCP44-PAD. The high-efficiency rigid cellulose media provides excellent saturation to produce lower temperatures. Set consists of 1 back pad, two side pads and replacement pegs for quick, easy installation. Use With MasterCool MCP44, TV# 166103.
6t sb, support box, intended for use when installing chimney in a frame, in a mobile home, or in a ceiling under a narrow section of roof, provides a finished installation at the ceiling level & will support up to 20' of a 6" diameter chimney, also provides shielding from insulation when installed in an unoccupied attic space, assembly is comprised of a black box designed for installation inside 16" o.c. Joists, a cylindrical shield, support bucket, ceiling trim & 4 screws.
