Mighty cool, 10,000-21,000 cfm, concentric cooler pump, 120v with cord & grounded plug, all metal housing, resettable thermal overload protection, all plastic parts are flame retardant, 45 degree elbow for pump hose, ul classified, for use with industrial/commercial coolers.
Round Gas Vent Double Wall Constrution with it's built-in air space, provides permanent insulation and keeps the inner pipe hot and outer relatively cool
Round Vent Pipe and fittings are designed for use on approved gas appliances in residential and light commericial applications
You no longer have to use sheet metal screws to secure pipe connections if local codes require you to. Just press the "LockTab" and you are done.
Underwriters Labotories UL 441 and National Fire Protection Agency NFPA 54 and NFPA 211
Venting gas fired appliances, water heaters, furnaces, stoves, etc.
LockTab-An alternative method to secure pipe wheen required by local code.
Outer material 28 gauge galvanized steel
Inner liner is Aluminum
Check Appliance Installation Instructions For Details
Industry Best Warrantty Contact Selkirk For Details
Flameseal is primarily used fo service penetrations around pipes, vents, ducts, and joints in horizontal and vertical fire separations. Adheres to wood, gypsum board, concrete, steel, copper, cast iron, and other common building materials. Lab tested and compatible with ABS, PVC, CPVC, PP, PE and PB plastic materials. Also compatible with all electrical wiring and telecommunication cables listed in the firestop system designs. All other substrates should be submitted to Henkel Technical Service Department for compatibility testing prior to use. (800-624-7767). Use this product only on listed Systems Designs printed in the Underwriters Laboratories and Warnock Hersey fire resistance directories. Not designed to be a waterproof seal. Do not apply if rain is expected within 24 hours, as exposure to rain, running or standing water or snow before the sealant is fully cured may cause it to washout. Not recommended for continuous water submersion or use below the waterline.
1, 2 & 3 Hour Fire Resistance Rated
Seals Out Fumes, Smoke & Water
Fills Gaps, Cracks & Holes
Residential and Commercial Fire-Stopping Applications
Low VOC Content Qualifies for LEED points and is GREENGUARD Approved
Accepts Primer and Paint Unlike Silicone-Based Sealants
this side-draft 28 x 28 x 34 cooler cover helps prolong the life of an evaporative cooler by preventing rust and corrosion to the cooler and cooler parts. the cover is 50% lighter than canvas and lab tested to be just as strong as traditional duck canvas. additionally, all seams are double stitched. the fabric is water resistant while still letting moisture inside the cooler escape. the cover and tie-down string are uv protected to prolong the life of the cover.
3"d x 12"l, pellet vent pipe, fully unitized, twist lock construction, can be used in both vertical & horizontal installations, 3-5/8" od, designed for stoves that burn wood pellets, double wall & air insulated pipe, inner wall of .012" super ferritic stainless steel, outer wall .018" laser welded galvalume, patent pending venting for stoves & inserts that use wood pellets, ul listed for 3" clearance to combustibles in usa & Canada.
3" diameter, wall strap, for use to support 3" diameter vent pipes or tee sections for the venting of pellet stoves & inserts, provides 1" clearance, recommended for use with every 4' of rise.
Supports 3 inch diameter vent pipes or tee sections.
this side-draft 34 x 34 x 40 cooler cover helps prolong the life of an evaporative cooler by preventing rust and corrosion to the cooler and cooler parts. the cover is 50% lighter than canvas and lab tested to be just as strong as traditional duck canvas. additionally, all seams are double stitched. the fabric is water resistant while still letting moisture inside the cooler escape. the cover and tie-down string are uv protected to prolong the life of the cover.
